We provide consultations for customer desires in addition to modification, such as molding machine diagnostics and equipment relocation construction.

More enhanced productivity

Ultra high mixing screw

  • Able to obtain a moldability equal to or more than the current moldability for PP, PE, and PS by using a UB screw provided with special mixing on the tip.
    Two types of UB screws can be selected depending on the application.

Holding pressure, plasticizing lap circuit

  • Allows plasticization during holding pressure process and is effective when plasticizing capacity is not sufficient.

Hydraulic operated shut-off valve

  • Rotary type: Dripping prevention and high-speed injection
  • Needle type: Dripping and streaming prevention

Mixing nozzle

  • Mixer unit has an easy-to-clean construction.
  • Different types of mixers are prepared and can be selected depending on your goals.

Hydraulic ejector differential circuit

  • Increased return speed (approximate twice) and shorter cycles.

Gate valve

  • Hydraulic opening and closing gate.
  • Please contact us with the desired specifications for the number of gates and the timing for opening / closing.

Double plasticization circuit

  • Rotates the screw again during extraction time.

Inquiry

For inquiries, contact the nearest sales office or service center

Easier to use molding machines

Retrofit of controller

  • Easy-to-use large color LCD
  • Includes memory and different type of monitors.

External memory

  • Expanded controller memory capacity

Corrosion resistant, wear resistant screw head

  • Screw main body and barrel are also prepared.

Cooling water flow exchanger

  • Alternately switches the flow direction of the cooling water.

Electromagnetic mold clamp

  • Because it is a magnetic type, any size mold can be clamped.

Inquiry

For inquiries, contact the nearest sales office or service center

More economical

Electrical plasticization

  • Makes the screw rotation electric to reduce plasticization power by approximately 50%

Heater insulation cover

Inquiry

For inquiries, contact the nearest sales office or service center

Implementation of new molding technology

Textile molding circuit

  • Allows integrated molding between textile using an injection compression molding method.
  • We also provide modifications for partial textile molding (such as double plasticization circuit).

Textile molding

Special screw for PP containing long glass fiber

  • Controls chipping of glass fibers to the minimum level.

High-temperature molding

  • Super engineering molding other than PEEK
  • Also accept modifications of fluorocarbon resin molding and others.

Inquiry

For inquiries, contact the nearest sales office or service center